xmodem升级IOS的详细步骤

钱塘在线

上周被害苦了，所以请教了许多高手，按照以下的详细步骤升级你的IOS肯定又快又管用，对大家有点帮助！


QuickTip added by adhawkin on Mon Apr 30 12:11:36 PDT 2002
Recovery from booting to rommon
Introduction: What does this document deribe? How to recover from botting into rommon mode on 3600 series routers. What problem is the customer having that this document will solve? Customer copd an IOS image that required more flash than they had available on their 3640 router.
Versions: What hardware and software versions did you use to dlop this document? Customer was suing 11.2(16) and wanted to upgrade to 12.1(4.5)

Use this fld to input your configuration steps or
problem resolution.
The steps below outline how to connect and download another image using
XMODEM through the console port of the router.
How to download an image using xmodem when routers 3600 and 2600 goes into
ROMMON prompt?
Problem:- The router is in ROMMON prompt and when it is reloaded it again
goes into ROMMON prompt.
Solution:-
To solve the above problem, you can download an image to the 2600 and 3600
using the console port of the router.
The procedure uses the default console speed of 9600 bits per second.
Xmodem is a slow transfer protocol. Increasing the console speed (which is
possible
for the Cio 2600 and 3600 sers routers) helps decrease the time it
takes to do the xmodem file transfer.
3600 / 2600 in rommon
1- rommon > b ---------- to boot first image in flash mem
2- rommon > dir flash: ---------- list the files on the device
3- rommon > meminfo ---------- to see memory information
You are
1